L'électronique rend les machines plus intelligentes, puissantes, précises et efficaces.

Le concept d'ISOBUS est : la communication par un langage commun, indépendant de l'appareil et du fabricant. Cela est devenu particulièrement important depuis que de nombreux fabricants ont commencé à développer matériel électronique et applications logicielles pour éviter les problèmes de fonctionnalité. Sachant que les machines d'une exploitation agricole peuvent être constituées d'équipements de différents fabricants, ISOBUS garantit des interfaces de communication standardisées. Grâce à son fonctionnement fiable et sécurisé, le nombre de machines équipées d'ISOBUS augmente considérablement. Les avantages de l'utilisation de la technologie ISOBUS et de son large éventail de fonctions sont évidents.

Nos tracteurs peuvent être équipés d'ISOBUS, ce qui permet d'utiliser un grand nombre de fonctions. Elles comprennent TECU, qui fonctionne comme une sorte d'« ordinateur de travail » sur le tracteur. En outre, une prise arrière (et avant en option) est disponible pour connecter un appareil certifié ISOBUS de tout fabricant. En cabine, une prise sur le pilier B permet de connecter tout terminal conforme à ISOBUS. Pour faire fonctionner un appareil ISOBUS, vous pouvez équiper nos machines de l'iMonitor3, entièrement compatible avec ISOBUS. Il est disponible en deux tailles et offre différentes fonctions – dont de nombreuses ne demandent aucune activation.

    timthumb (3).jpg

    IMONITOR3

    Het door DEUTZ-FAHR ontwikkelde concept omvat de mogelijkheid om voor alle functies slechts één duidelijk gestructureerde terminal te gebruiken - dit zorgt voor maximaal werkcomfort en een beter overzicht. Hierdoor kunt u heel eenvoudig de apparaatfuncties bedienen, instellen en aanpassen. Veelgebruikte functies kunnen worden toegewezen aan knoppen op de armleuning als dit door het apparaat wordt ondersteund. Afhankelijk van de tractorconfiguratie kunt u maximaal 19 functies toewijzen (10 knoppen op de armleuning, 9 sneltoetsen op de iMonitor). De zeer ergonomische bedieningen maken het dagelijkse werk veel gemakkelijker.
    Ongeacht de gebruikte combinaties of dat de machine waar u mee werkt een balenpers, opraapwagen, zaaimachine, spreider of veldspuit is - de gebruikersschermen van alle apparaten worden op de iMonitor weergegeven. De structuur en het displayoppervlak van de 8" en 12" iMonitors omvatten veel ISOBUS-functies die de toepassing niet alleen comfortabeler, maar ook nauwkeuriger, effectiever en efficiënter maken.
    Bovendien beperkt u met onze oplossing de kosten van het bedrijfsmateriaal, meststoffen of gewasbescherming en bespaart u tijd! De automatische sectiecontrole met maximaal 200 automatisch gestuurde secties of de variabele doseringscontrole garanderen dat het gewasbeschermingsmiddel en de voedingsstoffen exact op het juiste moment, op de juiste plaats en in de juiste hoeveelheid worden gedeponeerd.
    ISOBUS vereenvoudigt niet alleen de communicatie tussen machines, maar ook tussen softwareapplicaties. Het ISO-XML gegevensformaat garandeert een betrouwbare uitwisseling van gegevens van en naar de iMonitor, bijvoorbeeld met een FMIS. Dit vereenvoudigt en vermindert aanzienlijk de inspanningen voor het bijhouden van een documentatie.

    timthumb (4).jpg

    XTEND

    De standaarduitvoering van de iMonitor heeft een groot aantal functies. Wij weten dat het steeds gebruikelijker wordt om met meerdere complexe applicaties tegelijk te werken. Daarom installeren klanten vaak een tweede terminal bovenin de cabine voor een beter overzicht over de verschillende functies. Wij hebben een veel betere oplossing voor dit scenario: XTEND Met deze uitstekende functie kunt u door simpelweg een tablet of smartphone via WLAN met de iMonitor's Hotspot te verbinden het weergavegebied vergroten. Wanneer u de XTEND-app downloadt naar uw mobiele apparaat kunt u er via sneltoetsen voor de AUX-toegewezen knoppen de geleidingstoepassing mee weergeven of er alle ISOBUS-UT-functies mee controleren. De Universal Terminal wordt weergegeven op uw apparaat terwijl andere applicaties, bv. spoorgeleiding op de iMonitor kunnen worden weergegeven. Dankzij de draadloze verbinding kunnen gebruikers de tablet ook buiten de cabine bedienen, bv. voor machinekalibraties. Dankzij al deze eigenschappen is XTEND een zeer gebruiksvriendelijke en kostenefficiënte oplossing voor het beste overzicht over al uw applicaties!

     

    Bekijk de video

    TIM

    TIM (Tractor Implement Management) è una nuova funzione ISOBUS che consente la comunicazione bidirezionale. Questo significa che alcune funzioni non sono più controllate dall’operatore sul trattore, ma dal trattore stesso. Di conseguenza, alcune funzioni possono anche essere automatizzate. In altre parole: il dispositivo controlla il trattore. DEUTZ-FAHR è il primo costruttore di trattori ad aver ottenuto la certificazione TIM da parte di AEF. Questo consente a qualsiasi attrezzatura con certificazione AEF TIM di controllare funzioni del trattore quali idraulica, velocità del veicolo, PTO o sollevatore. Per un’automazione sicura e affidabile delle funzioni, è necessario che siano certificati sia il trattore che il dispositivo. TIM aumenta l’efficienza e la qualità del lavoro. Con i processi automatizzati, il lavoro è molto più agevole grazie al minor numero di operazioni manuali, con conseguente ulteriore minor affaticamento da parte dell’operatore. I nostri trattori, già da tempo, offrono la predisposizione per la certificazione TIM e sono già stati testati con numerosi tipi di attrezzature di vari costruttori. Chiedi al tuo concessionario di attivarla sulla tua macchina!

     

    ISOBU-SDF-panoramica.jpg

    HIERONDER VOLGT EEN OVERZICHT VAN ALLE FUNCTIES DIE DOOR ONZE MACHINES KUNNEN WORDEN BEHEERD (AFHANKELIJK VAN DE APPARATUUR)

    UT: Any attachment can be controlled with the Universal Terminal in the iMonitor. In full screen mode, the UT can be shown across the entire screen size
    AUX-N: With Auxiliary Control (new), function buttons on the armrest are used to control the implement. In addition to the MaxCom joystick, the buttons on the cross lever are also available. Depending on the installed options, this provides up to 10 controllable functions. The iMonitor offers additional 9 soft keys for free assignment. Really convenient: steering system functions, such as the engagement of the automatic steering system, can also be assigned to the buttons.
    TC-GEO: Additionally offers the option of recording or planning side- spedific data. The iMonitor3 (12"") can process application maps, for example. The variable rate control allows a very precise regulation of output to save recourses and even increase yield. Our combine harvesters can generate yield maps in combination with the Yield Trak system.
    TC-BAS: The iMonitor provides the ISOBUS TC-BAS functionality which ensures the documentation in the ISO-XML data format. This contains all total values which are relevant for activity performed. The benefit is compatibility for the exchange of data, e.g. between a farm management system with the iMonitor or any other manufacturers and providers. Tasks can easily be imported to the task controller of the iMonitor and/or the finished documentation can be exported afterwards.
    TC-SC: This function automatically switches sections of the ISOBUS implement (e.g. sprayer, spreader, planter) depending on GPS position and overlap. The iMonitor3 can easily work with up to 200 sections! This feature is already available as standard in all iMonitors.
    TECU: The tractor ECU is the “job computer” of the tractor. Information such as speed or PTO speed are provided centrally here. In addition, a socket on the rear (and optionally front) of the tractor and a terminal socket in the cab on the b-pillar are included. This allows as well to connect any ISOBUS compliant display from other suppliers to display or operate an ISOBUS implement.
    TIM: Communication in two directions. Information can be transferred from the implement to the tractor. An implement can use the Tractor Implement Management System (TIM) to automatically control certain tractor functions. This includes: driving speed, spool valves, hitches, PTO.