Tractors

7 Series

FUTURE TECHNOLOGY MADE IN GERMANY
Power: 226-246 HP
Cylinders: 6
Weight: 9.100 kg
Wheelbase: 2.868 mm

TOP GERMAN TECHNOLOGY

Success is achieved by enterprises that are able to tackle every task throughout the season using the lowest possible amount of resources and being effective with the time available. Equally, every penny counts when it comes to reducing production costs. DEUTZ-FAHR has developed the new 7 Series for such businesses. The two new 7 Series models deliver up to 246 HP and stand out for a range of trademark German characteristics: high quality, high precision and reliability combined with cutting-edge technology in terms of both cost-effectiveness and comfort.

The 7 Series represents the culmination of highly innovative and intelligent tractor technology manufactured at our new facility in Lauingen, Germany, offering the exceptional comfort of the MaxiVision 2 cab, intuitive controls, a newly designed armrest, state-of-the-art precision farming systems, highly efficient engine and transmission technology, innovative axles and brakes which ensure optimal driving comfort and maximum safety. Furthermore, the hydraulic systems and lift capacity both front and rear, compliment the overall 7 Series specification making this tractor the ideal partner for increasing the productivity of professional contractors and agricultural businesses – both in the field and on the road.

Ask for a quote
See more details

7 Series

Ask for a quote
Back to info

    Overview

    • Engine

    • Transmission

    • PTO

    • Hydraulic system

    • Brakes

    • Cab

    STAGE V SIX CYLINDER ENGINES: POWERED BY EFFICIENCY

    The new 7 Series is equipped with a completely redesigned engine in terms of environmental impact and cost-effectiveness. The new Deutz 6.1 Stage V engine is more responsive, offers higher reserve torque and has a higher torque at lower rpms. At the same time, consumption of fuel and AdBlue has been reduced by 5 %, compared to the previous generation. The revised exhaust system features SCR after treatment and an additional, passive DPF (diesel particulate filter). DPF offers three advantages compared to the usual active filters: no fuel injection enters the filter, less heat is generated around the unit and the filter regenerates much more quickly. This saves fuel and money while conforming to all international emission standards.

     

    timthumb.jpg
    Further details

    TTV TRANSMISSION. TURN POWER INTO TRACTION

    The new 7 Series is fitted with state-of-the-art electronically controlled continuously variable TTV transmission technology. It is a solid concept that has been tried and tested over the years, now with new software for even better performance. DEUTZ-FAHR is the only manufacturer that offers a 60 Km/h tractor in such a compact design. All final speeds of 40 Km/h, 50 Km/h or 60 Km/h can be reached at a reduced engine speed, which is extremely fuel efficient. Overall, the speed range extends from 0.2 Km/h to 60 Km/h. For field work, the TTV transmission system operates most efficiently at all speeds.

    The highly comfortable TTV transmission is extremely efficient thanks to its four mechanical stages, which change automatically. Engine and transmission management are fully integrated, providing a comfortable automatic system for mechanical range shifting. Up to four cruise speeds can be stored in order to optimise work processes. A new trailer stretch mode increases driving safety on hilly terrain. Every single detail of the TTV transmission system has been designed to maximise the productivity of the 7 Series.

     

    timthumb (1).jpg

    WORKING WITH ALL IMPLEMENTS IN ANY SITUATION

    The productivity of a tractor depends directly on the equipment it can drive. The aim is to reduce the amount of distance travelled through increasingly large and heavy attachment combinations. This is where the 7 Series clearly demonstrates its strength. With three PTO speeds (540ECO/1000/1000ECO) at the rear and 1000 or 1000ECO at the front, all work can be carried out very efficiently. Thanks to the reduced engine speed characteristics, coupled with the ECO power take-off sysytems, fuel consumption is significantly reduced. All hydraulic and PTO functions can be easily set and controlled from the armrest in the cab. An external control of hydraulics, rear lift and PTO from both sides of the tractor is also possible.

     

    timthumb (2).jpg

    LIFT UP YOUR PRODUCTIVITY

    The new 7 Series provides attachment area technology that was previously available only in higher power classes. The rear attachment area features up to five hydraulic control valves, while the front attachment area has two. The absolute highlight is that all valves are proportionally controlled.

    The new hydraulic system of the 7 Series allows a position-controlled front linkage to be equipped. Until now, such advanced technology was only available on the 9 Series. The lifting capacity is up to 5480 kg, an impressive figure. Additionally, equipment is positioned much closer to the tractor with the newly integrated front linkage concept, which substantially enhances lifting capacity. The front mounting area also features an integrated ISOBUS socket. The hydraulic pump delivers an output of 120 L/min as standard or 160 L/min on request. The load sensing system is included as standard. A separate pump supplies the steering so that the working hydraulic system is not compromised. The rear lifting capacity is 10000 kg.

     

    timthumb (3).jpg

    FOR UNIQUE SAFETY IN THIS TRACTOR CLASS

    Productivity needs maximum vehicle control - both in the field and on the road. At top speed as well as on challenging ground conditions and with the heaviest equipment. The 7 Series gives you a uniquely valuable sensation: safety in every situation.

    The new heavy duty front axle with suspension and the braking system of the 7 Series are unique in this tractor class. The intelligent and adaptive suspension system give the new 7 Series maximum stability – both during heavy tillage operations and when driving loads. The innovative suspension concept stabilises the tractor during all transport operations and boosts driving safety. In order to ensure better handling on uneven ground, the dampers are mounted on the front side of the axle.

    The 7 Series is the only standard tractor that is fitted with high performance dry disc brakes on the front axle. The additional Booster brake system ensures maximum braking performance with the lightest pedal pressure. No other standard tractor offers a heavy duty front axle, dry disc brakes combined with the booster brake system and improved safety.

     

    timthumb (4).jpg

    ERGONOMIC OPERATION. MAXIMISING DRIVER'S COMFORT

    The unique features offered by MaxiVision 2 cab can be seen inside and also from outside. When it comes to ease of use and ergonomics, the new 7 Series takes care of work for the driver to the extent permitted by current technology. The new InfoCentrePro on the dashboard features a 5" colour display, providing the driver with a stream of data about the tractor’s operating conditions. It offers maximum convenience in terms of settings and information. In order to allow precise, stress-free work in all lighting conditions, the tractor can be fitted with an optional 40.000 lumen LED package with four working headlights. The interior is designed for the driver's comfort - reduced engine noise, vibrations and heat due to the cab and engine hood being separated. The new hood encapsulates the latest, highly contemporary look of the DEUTZ-FAHR tractor family, while its compact design also ensures outstanding forward visibility. The best possible view of rear attachments is guaranteed by the rearward position of the cab.

    timthumb (5).jpg
    Further details

    Test it in the field

    Book a test drive

    Technical specifications

    ASM

    An electronic system which automatically engages and disengages drive to the front wheels and the differential lock in relation to steering angle, speed and rear lift position (depending on model).

    Ask for a quote

    Pursuant to Article 13 of Regulation (EU) 2016/679 (GDPR), we inform you that your personal data, freely provided by you, will be processed by SAME DEUTZ-FAHR Italia SpA, Data Controller, for the sole purpose of ( i) manage your contact request and provide you with the information requested by you. With your express consent, your data will be processed in order to (ii) follow up your request to subscribe to our automated newsletter containing information about our products, the latest news and other advertising and / or promotional material (iii) send you promotional material and customized marketing based on your tastes, interests, purchases. We remind you that you will always have the possibility to withdraw your consent to this registration by clicking on the appropriate link in each newsletter or by contacting the data controller. The provision of your personal data is free, however failure to provide the data marked with * will prevent us from responding to your request. If you decide to provide us with your data, we inform you that these will be processed by personnel authorized by the Data Controller and will be kept for the time necessary to pursue the individual purposes indicated and, in the case of consent given for the purpose referred to in point (ii) , for the entire period in which the newsletter service will be active, in any case without prejudice to the revocation of consent or the exercise of the rights of opposition and cancellation of the Data by you. In no case will your data be disclosed but we inform you that they may be disclosed to third parties who perform, on behalf of the Data Controller, specific services aimed at guaranteeing the correct pursuit of the aforementioned purposes. Finally, we remind you that, pursuant to articles 15 et seq. of the GDPR, you have the right to obtain confirmation of the existence or not of data concerning you, to obtain an indication of the origin and the purposes and methods of processing, updating, rectification, integration of data as well as the deletion of data processed in violation of the law or if one of the reasons specified by article 17 of the GDPR exists. To exercise these rights, you can contact the Data Controller by writing to SAME DEUTZ-FAHR Italia SpA, with registered office in Viale Francesco Cassani, 14 - 24047 Treviglio (BG) - Italy, or by sending an email to the email address privacy@sdfgroup.com. If you believe that the processing of your data is in violation of the Regulations, you can lodge a complaint with the supervisory authority.
    Ask for a quote